The new Ecco Hybrid Wind Extractor consists of the combination of the Basic Wind Extractor with an Electric Fan designed to guarantee a permanent extraction flow with minimal energy consumption, achieving healthy spaces full of life thanks to the renewed and clean air from outside. It uses an electronically commutated (EC) motor operating during periods when ventilation requirements are greatest.
Making a comparison with different mechanical extraction systems on the market, taking into account the extraction flow, the Ecco Hybrid Wind Extractor is the ventilation-extraction system that consumes the least in the world market.
Ecco Hybrid Wind Extractor
Haga click en los números para más información
HOW DOES IT WORKS?
Its operation is based on the use of two fictitious engines:
• The hybrid ventilation system works by taking advantage of the force of the wind, and if that were not enough, the hybrid part would be activated using different accessories such as the hygrostat, thermostat, ultra-saving kit, control unit kit, time programmer, etc..
• The joint work of the wind ventilation plus the hybrid one make the consumptions the lowest of the market.
• In addition, the extraction flow of the Ecco-Hybrid Wind Extractor can be regulated, increasing or decreasing the revolutions of the Electric Fan by using a potentiometer, adjusting it to the extraction needs.
• The Ecco Hybrid Wind Extractor is listed as one of the most effective ventilation systems that comply with the Technical Building Code and with the HS3 of the Health section.
WHY CHOOSE US?
What make us different…
Ecco Wind ExtractorOur extractor
- WARRANTY: 10 YEARS
- MAXIMUM WIND SPEED TESTED IN LABORATORY ITA: 120 KM/H
- GUARANTEED PARTS JOINT SYSTEM: SPECIAL RIVETS
- SECURITY: SAFE SYSTEM TESTED BY THE NATIONAL INSTITUTE OF AEROSPACE TECHNIQUE (INTA, acronym in Spanish)
Spinning CowlExtractor of our competitor
- WARRANTY: 1 TO 2 YEARS
- MAXIMUM WIND SPEED TESTED IN LABORATORY ITA: 60 KM/H
- GUARANTEED PARTS JOINT SYSTEM: WELDING POINT
- SECURITY: IN PROCESS OF PROHIBITION OF USE DUE TO DANGER
Comparative report of the wind ventilation systems that exist currently in the market
ECCO Wind Extractors Benefits
The installation of a Wind Extractor carries a great number of advantages and general benefits for its industrial or domestic installation.
But in addition, ECCO Wind Extractors include specific additional benefits. In the following information boxes we detail them.
Among the general advantages of installing Ecco-Wind Extractors, we would like to emphasize:
- It constantly renews the indoor air of your ambient (24 hours a day).
- Reduces the thermal load generated by the exothermic production process.
- Raises thermal comfort indexes: balances internal / external temperatures (in the shade).
- Reduces airborne pollution.
- Reduces indoor humidity in your ambient.
- It creates a pleasant environment that encourages increased productivity.
- Safe working conditions are achieved, also decrease in the accident rate and absenteeism.
- It provides a more benign environment for the conservation of the structural elements of the building, goods, etc.
- Improves storage conditions for products that may or may not be perishable.
- Totally ecological, it does not consume electrical energy..
- It contributes to the reduction of energy consumption in Air Conditioners located in the area of influence.
- It does not produce noise.
- It represents an excellent cost / benefit ratio.
THE RESULT are healthy spaces full of life thanks to the renewed and clean air from outside. Transforming loaded and stale places, and saving up to 50% of electricity consumption using free and sustainable energy sources (wind energy and solar energy).
SPECIFIC ADVANTAGES OF ECCO EXTRACTORS
1.- Made entirely of aluminium
- Low weight (small starting torque), with a minimum breeze begins to swivel and increase its extraction capacity
- Low weight, which facilitates installation, whatever the type of cover is
- Corrosion resistance, especially in aggressive industrial or marine environments. Aluminium is highly resistant to atmospheric corrosion because, due to its great chemical affinity with oxygen, it spontaneously forms a thin, impermeable, resistant oxide layer in the air that is highly adherent to the metal, which prevents the corrosion from progressing
2.- Overlapping blades one on top of the other.
- This exclusive design prevents the possible entry of water (rain …)
3.- Each blade has three inlays
- The three inlays direct the drop towards the outside, therefore the entrance of water by rain is impossible.
Applications in the Industrial and Residential field
Our Wind Extractors can be used in a very wide number of Applications both in industry and residential filed.
- Industrial premises
- Factory with exothermic production processes
- Factory with processes without exothermic production
- Residential buildings through the exits of the shunts
- Suspended ceilings to reduce thermal load
- Farms reducing the accumulation of heat generated by solar radiation and by the heat given off by animals
- Electrical Substations
- Inverter booths for photovoltaic plants
- Paddle courts
- Sports centres
- Logistics facilities
- Storage of grain, nuts, etc.
- Manufacturers of Cardboard, packaging, etc.
- Food Industries
- Fishing and / or Canning Industries
- Recycling and / or Waste Management
- Graphics Industries
- Marble Industries
- Metallurgical Industries
- Plastic Industries
- Chemical Industries
- Textile Industries
- Fish farms
- Waste water treatment plants (WWTP)
- Drinking water treatment plants (DWTP)
- Water tanks (deposits)
|Aparición de humedad en los cuartos de baño||Disminuye la humedad en los cuartos de baño|
|Entrada y anidado de pájaros||Evita la anidación de pájaros|
|Acumulación de malos olores en los cuartos de baño||Evita el revoque por lo tanto acumulación de malos olores y no se apagan las calderas|
|Se apagan las calderas de gas
Mal tiro de la chimenea
|Mejora el tiro de la chimenea y no entra el humo hacia el interior|